LS Column Swivel Crane

For LS column cranes, the typical lifting support is mostly in the lower load range.

Loads can be quickly and safely grasped and transported. Smooth work is also possible by a wide choice of lifting speeds, the electric chain hoist used. LS column crane has manual arm rotation and hoist travel, the lift is electric two-speed.

The crane can be attached using a steel anchor plate with chemical anchors designed for dynamic loads, or to a concrete base (footings).

‍

Crane Type: Column LS

‍Load capacity: 80kg to 1000kg

‍Unloading: up to 7m

‍Rotation Range: 270

‍Stroke: electric two-speed

‍Hoist travel: handheld

‍Rotate the shoulder: handheld

‍Controls: by the controller suspended on the hoist

‍

‍Optional equipment of cranes‍‍

‍

Anchoring options‍

‍

‍To the existing floor, using a spreading plate, the crane is supplied with anchor bolts, spreading plate and chemical mortarFor this method of anchoring, the floor must be at least 200mm concrete C20/25. It is necessary to perform a static calculation — ITECO will ensure in the price of the work! The investor shall provide proof of the design materials from the floor (cut, quality, composition...), if not available, arrange for the construction and technical survey of the floor to be carried out. If the floor is not suitable, it is necessary to build a footboard.

‍Into concrete base, supplied with anchor bolts and templateInvestror builds the foot and the reinforcement basket according to the supplied drawing, then invites us to take the foundation joint, when the statics bring with them the anchor bolts and the template. After taking the foundation joint, it is possible to concrete the anchor bolts of the crane according to the template.

‍